neuf > Harmonicas > Lone Wolf

Lone Wolf Harp Delay

Description :

The Lone Wolf Harp Delay is centered around a delay chip that has a low noise rating at < -90dbv, low distortion, < 0.5% THD, 44k digital processing, and is capable of up to 300ms delay. The input is FET buffered for high impedance to provide proper loading for your favorite crystal or CM mic. The delay has a true bypass and is balanced to have an overall gain of 1x so that the level is the same when bypassed. The warmth comes from the superior bass response, distortion-free performance, and the filtering, which provides the effect of a distancing echo by reducing the highs more on every repeat. This delay has an even better roll-off in high frequencies than the Boss analog delay. The LED indicator is ON when the delay is in, and is OFF when the delay is in bypass. The microphone input jack acts as the ON/OFF switch. The Harp Delay is guaranteed to please even the most diehard analog delay fan.
A short DELAY setting will fatten your sound with a bassy tone and make the harp sound like a much larger instrument : a mid-range setting will give you a slap-back echo, which is a great effect, and with a three-quarters to full setting you will derive a stadium-like effect with several repeats that slowly fade out. The REPEATS control sets the number of repeats ; it can be set from one to many, but as is often the case, less can be more here. The BLEND control mixes your dry signal with the effect ; use this control to set the volume level of the echo. If you are new to delays, just try talking into the mic while changing the settings to get a feel for the controls and how they work.
The Harp Delay operates off of a 9V battery or a 9V DC power adapter. The AC adapter requirements are 9V DC with a minimum 200mA output and a 2.1mm x 5.5mm connector with a negative center and positive outside. The battery is switched OFF when an external power supply is used. Batteries should be replaced after 10 hours of use to avoid a possible noise that can occur due to low battery voltage. The IN jack acts as the ON/OFF switch, and the pedal is ON as long as there is a cable plugged into the IN jack.

Réserver le produit Harp Delay

Pour demander la réservation de ce produit, n’hésitez pas à nous contacter
par téléphone au 02 31 85 43 34 ou via le formulaire ci-dessous.
Nous tâcherons de vous répondre dans les meilleurs délais.